indi_staradventurer2i_telescope command not found

In this troubleshooting guide we learn how to fix indi_staradventurer2i_telescope command not found error message

Introduction

When you run more command in linux terminal / console, you get the following error message

indi_staradventurer2i_telescope: command not found

or when using sudo you get the following error message

sudo: indi_staradventurer2i_telescope: command not found

Solutions to indi_staradventurer2i_telescope: command not found

How To Fix indi_staradventurer2i_telescope: command not found in Ubuntu / Debian / Kali Linux / Raspbian

In Ubuntu indi_staradventurer2i_telescope is provided by indi-eqmod package.

indi-eqmod is:

This package contains the INDI driver fpr EQMod.

This INDI driver interacts with a mount controller using the Skywatcher Protocol through a serial link. It can directly drive Skywatcher and similar mounts through a serial port after a conversion of signal levels (see EQDIRECT interface), or any other mount hardware which uses this protocol.

This driver is compatible with any INDI client such as KStars or Xephem.

To fix this problem, we can install more using the command below.

sudo apt-get -y install indi-eqmod

This command might take some time to finish depending on your machine internet connection.

You can also use apt command to install indi-eqmod.

sudo apt -y install indi-eqmod

Or if you have aptitude installed you can use the following command.

sudo aptitude install indi-eqmod

Summary

In this tutorial we learn how to fix indi_staradventurer2i_telescope command not found error in Ubuntu / Debian / Kali Linux or Raspbian distribution.