indi_gige_ccd command not found

Introduction

When you run more command in linux terminal / console, you get the following error message

indi_gige_ccd: command not found

or when using sudo you get the following error message

sudo: indi_gige_ccd: command not found

Solutions to indi_gige_ccd: command not found

How To Fix indi_gige_ccd: command not found in Ubuntu / Debian / Kali Linux / Raspbian

In Ubuntu indi_gige_ccd is provided by indi-gige package.

indi-gige is:

This package contains an INDI driver for most GigE machine vision cameras through project Aravis.

Machine vision GigE cameras are designed towards throughput, and hence provide emphasis on high-speed video streaming. The main design goal for this driver is to use these cameras as primary imager or for guiding. Therefore, the main goal of this driver is not to provide high-speed video streams, but to control these cameras more or less as a generic CCD camera with a manual trigger and manual exposure controls.

Many of the pre-processing features found on many of these cameras have therefore been not exposed.

This driver is compatible with any INDI client such as KStars or Xephem.

To fix this problem, we can install more using the command below.

sudo apt-get -y install indi-gige

This command might take some time to finish depending on your machine internet connection.

You can also use apt command to install indi-gige.

sudo apt -y install indi-gige

Or if you have aptitude installed you can use the following command.

sudo aptitude install indi-gige

Summary

In this tutorial we learn how to fix indi_gige_ccd command not found error in Ubuntu / Debian / Kali Linux or Raspbian distribution.